S2000 — Troubleshooting
How to use this page
Each entry follows the same pattern: symptom → likely causes (most common first) → diagnostic steps → resolution. Start with the symptom you observe; do not skip the diagnostic steps, as multiple faults can produce similar symptoms.
Quick reference: error codes
| Code | Meaning | See section |
|---|---|---|
| (code) | (short description) | (link to entry below) |
| (code) |
(Fill this table as you document codes; link each row to a full entry below so the table stays a fast lookup index.)
Machine will not power on
Likely causes: (power supply, fuses, door interlock...)
Diagnostics:
- (Step)
- (Step)
Resolution: (...)
Machine powers on but shows error code
(One sub-entry per common code. Duplicate the symptom/causes/diagnostics/resolution pattern.)
Reel-related faults
(Reel tilt, reels not spinning, misaligned stops — one entry each.)
Hopper / payout faults
(Hopper jams, empty hopper condition, coin-out errors.)
Bill validator faults
(Rejection issues, stacker errors, communication faults.)
Printer faults
(Ticket jams, print quality, printer not responding.)
When to escalate
(Faults that indicate board-level failure and are better solved by swapping the board than by component repair — note where to source replacements.)